Discussion:
Yupiteru VT-225
(too old to reply)
Mike
2004-01-21 09:08:30 UTC
Permalink
Hi All,

I have a Yuppi VT-225, secondhand with no manual. I have mastered all the
funcions except the Band Write and was wondering if anyone could enlighten
me on this and what precisel it does?

TIA

Mike
New Zealand
Jonathan Clough, Javiation, Bradford, UK (http://www.javiation.co.uk)
2004-01-21 10:40:14 UTC
Permalink
Post by Mike
I have a Yuppi VT-225, secondhand with no manual. I have mastered all the
funcions except the Band Write and was wondering if anyone could enlighten
me on this and what precisel it does?
Used when programming search bank limits.

Extract from the '225 manual I wrote:

EXAMPLE
To program search Bank 6 to start at 138.15MHz & finish at 141.15MHz, in
FM Mode & 10KHz steps

1. Ensure you are in manual mode and not searching or scanning (In the
example below the set is tuned to 138.50MHz, Narrow FM in 10KHz
steps)
2. Press FUNCTION + BANDWRITE (The 10 banks at the top of the display
will flash)
3. Press 1 3 8 1 5 (The bottom limit/the frequency we wish to start at)
4. Press ENTER
5. Press 1 4 1 1 5 (The top limit/the frequency we wish to finish at)
6. Press ENTER
7. Press 6 (this is the bank we will store these limits in)
8. Press ENTER (If the "beep" is still on a double beep will sound to
indicate the above has been accepted the display will return to the
previous frequency in manual mode)
--
Cheers,
JC
Javiation - Scanners & receivers from all the leading manufacturers
01274 639503
http://www.javiation.co.uk
Mike
2004-01-23 21:47:13 UTC
Permalink
Hi Jonathan,

Thanks for the programming guide, no how do you start the Bank search?

Appreciated,

Mike

"Jonathan Clough, Javiation, Bradford, UK (http://www.javiation.co.uk)"
Post by Jonathan Clough, Javiation, Bradford, UK (http://www.javiation.co.uk)
Post by Mike
I have a Yuppi VT-225, secondhand with no manual. I have mastered all the
funcions except the Band Write and was wondering if anyone could enlighten
me on this and what precisel it does?
Used when programming search bank limits.
EXAMPLE
To program search Bank 6 to start at 138.15MHz & finish at 141.15MHz, in
FM Mode & 10KHz steps
1. Ensure you are in manual mode and not searching or scanning (In the
example below the set is tuned to 138.50MHz, Narrow FM in 10KHz
steps)
2. Press FUNCTION + BANDWRITE (The 10 banks at the top of the display
will flash)
3. Press 1 3 8 1 5 (The bottom limit/the frequency we wish to start at)
4. Press ENTER
5. Press 1 4 1 1 5 (The top limit/the frequency we wish to finish at)
6. Press ENTER
7. Press 6 (this is the bank we will store these limits in)
8. Press ENTER (If the "beep" is still on a double beep will sound to
indicate the above has been accepted the display will return to the
previous frequency in manual mode)
--
Cheers,
JC
Javiation - Scanners & receivers from all the leading manufacturers
01274 639503
http://www.javiation.co.uk
Jonathan Clough, Javiation, Bradford, UK (http://www.javiation.co.uk)
2004-01-23 22:32:27 UTC
Permalink
Post by Mike
Thanks for the programming guide, no how do you start the Bank search?
Bank number then Search. 1 -> Search, 2 -> Search etc.
--
Cheers,
JC
Javiation - Scanners & receivers from all the leading manufacturers
01274 639503
http://www.javiation.co.uk
Robert J Mitchell
2004-01-25 16:05:44 UTC
Permalink
If you want to search band 6 then hit 6 search and it will search
betqween the limits you set. I am assuminfg it works like my 7100 Yupiteru.
Good luck...
Post by Mike
Hi Jonathan,
Thanks for the programming guide, no how do you start the Bank search?
Appreciated,
Mike
"Jonathan Clough, Javiation, Bradford, UK (http://www.javiation.co.uk)"
Post by Jonathan Clough, Javiation, Bradford, UK (http://www.javiation.co.uk)
Post by Mike
I have a Yuppi VT-225, secondhand with no manual. I have mastered all
the
Post by Jonathan Clough, Javiation, Bradford, UK (http://www.javiation.co.uk)
Post by Mike
funcions except the Band Write and was wondering if anyone could
enlighten
Post by Jonathan Clough, Javiation, Bradford, UK (http://www.javiation.co.uk)
Post by Mike
me on this and what precisel it does?
Used when programming search bank limits.
EXAMPLE
To program search Bank 6 to start at 138.15MHz & finish at 141.15MHz, in
FM Mode & 10KHz steps
1. Ensure you are in manual mode and not searching or scanning (In the
example below the set is tuned to 138.50MHz, Narrow FM in 10KHz
steps)
2. Press FUNCTION + BANDWRITE (The 10 banks at the top of the display
will flash)
3. Press 1 3 8 1 5 (The bottom limit/the frequency we wish to start at)
4. Press ENTER
5. Press 1 4 1 1 5 (The top limit/the frequency we wish to finish at)
6. Press ENTER
7. Press 6 (this is the bank we will store these limits in)
8. Press ENTER (If the "beep" is still on a double beep will sound to
indicate the above has been accepted the display will return to the
previous frequency in manual mode)
--
Cheers,
JC
Javiation - Scanners & receivers from all the leading manufacturers
01274 639503
http://www.javiation.co.uk
---
Outgoing mail is certified Virus Free.
Checked by AVG anti-virus system (http://www.grisoft.com).
Version: 6.0.558 / Virus Database: 350 - Release Date: 1/2/04
Mike
2004-01-27 01:18:57 UTC
Permalink
Gentlemen,

Thankyou for resolving this for me, your efforts are appreciated.

Mike
New Zealand
Post by Mike
Hi All,
I have a Yuppi VT-225, secondhand with no manual. I have mastered all the
funcions except the Band Write and was wondering if anyone could enlighten
me on this and what precisel it does?
TIA
Mike
New Zealand
d***@hotmail.ch
2018-10-03 12:04:52 UTC
Permalink
Post by Mike
Hi All,
I have a Yuppi VT-225, secondhand with no manual. I have mastered all the
funcions except the Band Write and was wondering if anyone could enlighten
me on this and what precisel it does?
TIA
Mike
New Zealand
Loading...